|
Brass Baron's Child Wall
Spitter
Brass Baron Fountains 5"H x 3.5"W Verdigris
(green-grey) patina finish In addition to their beauty, Brass Baron fountains
are readily portable and easy to install. Three elements are required for
installation: The fountain sculpture... is plumbed with copper tubing with a
hose barb welded to the tubing at the bottom of the sculpture. The receptacle to
hold water... can be of any non-pours material large enough to receive the water
emitting from the fountain sculpture. A submersible, recirculating pump... draws
the water from the pump submerged in the receptacle through a plastic hose
attached to the hose barb on the fountain sculpture. The water runs through the
copper tubing inside the sculpture and flows back into the receptacle, thus
providing a continuous flow of recirculating water. The pump's electrical cord
is plugged into a grounded 3-prong outlet. Receptacle to hold water &
Recirculating Pump are not included with the fountain. |
Brass Baron's Hen Feathers
Acanthus Leaf Spitter Wall Plaque Fountain
7 inches wide and only weighs 4 pounds.
Brass Baron's Oak Leaf Plaque
Spitter 14 inches wide
and only weighs 16 pounds. |
